|
|
MEC Hand and Foot Operated Heat Sealers
Impulse Hand Sealers
MEC manufactures quality Impulse Hand Sealers. They are the number one selling sealers in Taiwan with over a million in use. Perfect for a multitude of packing applications. Excellent air and watertight seals on plastic materials listed below:
Polyethylene Pilofilm P.V.A.
Polyurethane Kel-F Tivac
Polyvinylchloride Polyflex Saran
Polypropylene Mylar Nylon
and all other heat sealable materials. Replacement kits and parts always available. | PI 100HI / 200HI / 300HI / 400HI / 500HI / 205HI / 305HI / 405HI PI 100HI / 200HI / 300HI / 400HI / 500HI / 205HI / 305HI / 405HI |
Magnetic Hold Impulse Sealers
This tabletop impulse sealer has the ability to seal with ease. Comes complete with dual timers – one for sealing and one for congealing. A built-in magnet holds the sealing arm down during the heating cycle and then releases it automatically once the cooling cycle is completed. The sealing widths available for this unit are 2mm or 5mm. No pre-heating is required for our impulse units.
| |
Extra Large Hand Sealers
Also available on 2mm seal width
This extra long 450mm, 600mm or 800mm Impulse Sealer enables the user to seal large objects on a table top. Comes standard with a round element wire for sealing and trimming, sealing timer and a carrying handle for portability. Sturdy steel, lightweight construction.
| PI 450HI / 600HI / 800HI |
Impulse Sealers with Cutter
The Impulse Sealers with Cutters (C series) consist of 200mm, 300mm and 400mm models. All are equipped with a sliding blade that cuts excess material 7mm from the seal. The impulse Sealers with Cutters are excellent for sealing poly-tubing and plastic materials. Available in seal widths of 2mm and 5mm. Perfect for applications where roll bags are used.
|
PI 200HC / 300HC / 400HC / 205HC / 305HC / 405HC
|
Impulse Sealer (Medical)
This unit is specifically designed and recommended for the health care industry. It creates air and watertight seals on sterilization (paper – plastic) rolls and tubing materials. This compact unit has a built in warning beeper to notify the user when each seal is complete. This Impulse Sealer produces an embossed, honeycomb texture with a width of 10mm. This medical impulse sealer can be used for many other applications that require wider seals on plastic materials.
| PI 2010HC
|
Manual Double Impulse Sealers
Top and bottom sealing with table top ease. Dual heating elements for applications that require more heat than a regular hand sealer can give. This heavy duty hand operated unit can seal up to 0.4mm. Excellent for plastic lined, foil and gusset bags.
Features:
- Hand operated 5mm or 10mm wide double seal.
- Heavy duty transformer, for heavy duty production.
- Strong cast aluminum casting.
- Portable bench top model. | PI 305FH |
Manual Constant Heat Sealers
This tabletop constant heat hand operated sealer is excellent for sealing polycello films, humidity-proof cellophane films, polyethylene films, aluminum foil coated bags and gusseted bags. It comes equipped with a mesh seal 10/15mm wide by 200/300mm long. Serrated (horizontal lined) jaws available. This sealer is ideal for producing wide seals of thick bags. Portable bench top unit. | PI 200CFH |
Portable I Bar
The new portable impulse I bar system makes sealing large objects easier, special for gift baskets and most packaging products. The hand held unit utilizes a micro switch to activate the impulse sealing/cutting wire. It has a 3M.electrical cord, connecting from the temperature controller to the hand held unit, enough to handle the biggest jobs. Adjustable temperature controller.
| PI 300HP / 450HP / 600HP
|
Clam Shell Sealer
Dual heat multipurpose hand held constant heat sealer. Ideal for sealing clam shells of for spot sealing. Supplied with a high and low temperature control switch with power light.
To spot seal PSP, PVC, and EPS food. | PI 105CH |
Constant Heat Roller Sealers
Seal polyethylene or cellophane by moving the 2-1/4”diameter Teflon coated wheel along the material to be sealed. This versatile sealer can make a round oval or square textured 5mm seal. Adjustable temperature range from 60-220oC.
| PI 801HW (1mm) / 802HW (5mm) / 803HW (9mm)
|
Hand Held Bar Sealers
Features:
- Temperature controller.
- On / Off switch.
- Lightweight and easy to grip.
Single Bar – 2mm (150HS)
* For PE film
* Teflon covered heated jaw for light and medium gauge films
* 2mm seal | Double Bar – 15mm (150DH)
* For cellophane and foil.
* Double 15mm wide heating jaws for cellophane, foils, and heat sealable labels.
* Vertical line embossed seal. |
Automatic Single Impulse Sealers
Automatic programmable Impulse Sealers are designed for the repeated sealing of thermoplastic films such as polyethylene and polypropylene. This unit is controlled by a plug-in transitorised circuit board and electronic timers. Uniform pressure is provided by a timer controlled electromagnet pulling the arm down. These popular models eliminate operator error. Once the correct control settings have been programmed, consistent seals are maintained automatically, making the last seal as perfect as the first. The automatic sealer is ideal for packaging.
| PI 350A1 / 450A1 / 600A1 / 355A1 / 455A1 / 605A1 / 3010AI / 4510AI / 6010AI |
Automatic Upper Jaw Impulse Sealers
The Foot Upper Automatic (FUA) has the sealing element on the upper jaw and the silicon rubber on the lower jaw. This helps to protect the element from moisture and contamination. The FUA is designed for the continuous sealing of thermoplastic films such as polyethylene and polypropylene and makes a clean and secure seal. The sealing time in this unit is controlled by a plug-in transitorised circuit board and electronic timers. The uniform pressure is provided by an electromagnet that pulls down the sealing arm, helping eliminate operator error. Once the correct control settings have been programmed, consistent seals are maintained automatically and consistently, making the last seal as perfect as the first. This sealer is ideal for packaging candies, food, stationery, drugs, tools, replacement parts and a variety of other products. Includes an electric foot pedal for manual operation.
| PI 300FUA / 450FUA / 600FUA / 305FUA / 455FUA / 605FUA / 3010FUA / 4510FUA / 6010FUA
|
Automatic Single and Double Impulse Sealers
This unit is a heavy duty, single or double impulse, automatic or manual heat sealer. It can seal up to 0.5mm, gusseted or regular thermoplastic film. Separate programmable timers for heating, congealing and recycling for different material thickness. Creates perfect seals every time. This sealer is best for all sealing purposes. Foot switch included for manual operation. Available in 5mm and 10mm sealing widths.
| IP 305FDA / 455FDA / 605FDA / 3010FDA / 4510FDA / 6010FDA |
Automatic Single Constant Heat Sealers
This automatic / manual constant heat sealer is excellent for sealing poly-cello films, humidity proof cellophane films, polyethylene, aluminum foil coated bags and gusseted bags. A distinctive 3mm seal makes this sealer ideal for producing wide seals on thick bags. Separate programmable timers for material thickness, congealing, and recycling. Foot switch included for manual operation. Optional serrate (horizontal lined) jaws available.
| PI 200CFA-S / 300CFA-S / 400CFA-S |
Stainless Steel – Horizontal Bans Sealer
This versatile portable horizontal band sealer is virtually the same machine as the one listed above but is one quarter the size. This unit is ideal for short bags that are wide or thick enough to require the need of a band sealer. Conveyor speed 0 – 12M. per minute, material thickness up to 0.4 mm and unlimited length. This unit can also emboss alpha numeric information on seal. The PI 881BS is completely adjustable. Comes equipped with speed control, embossing wheel, heat controls and repair kit. Embossing printing wheel and type optional. Optional Imprinter Available.
| PI 881BS |
Portable Vertical Band Sealer
Our vertical band sealer has same features as model PI 882BS except bags are sealed in the “standing position”. The method of sealing is ideal for the packaging of bags containing spillable items such as powders, liquids, grains, etc. Conveyor speed up to 12M. per minute. This unit can also imprint as well as seal. The IP 882BS portable band sealer is completely adjustable for height, heat and speed. Comes equipped with a repair kit. Embossing printing wheel and set of type optional. Maximum bag height of 300m .
| PI 882BS |
Horizontal Band Sealer with Stand Frame
This versatile portable horizontal band sealer is virtually the same machine as the one listed above is one quarter the size. This unit is ideal for short bags that are wide or thick enough to require the need of a band sealer. Conveyor speed up to 12M. per minute, material thickness up to 0.4mm and unlimited length. This unit can also emboss alpha numeric information on seal. The IP 883BS is completely adjustable. Comes equipped with speed control, embossing wheel, heat controls and repair kit. Embossing printing wheel and type optional.
| PI 883BS |
Gas Flush and Vacuum Sealers
Dual nozzle single impulse
IP 455VG and 605VG is an MEC designed portable vacuum sealer. Its sturdy construction makes it perfect for most applications. These units have separate timers for vacuuming, sealing and cooling. This quality built vacuum sealer with its 5mm, 10mm wide heating element and twin retractable nozzles makes seals and vacuums bags at a very affordable price. Electric foot pedal and work shelf included.
| IP 455VG / 605VG / 4510VG / 6010VG |
Food Wrapper
The MEC food wrapper helps to keep food fresh longer and extends the shelf life. It keeps products clean from dirt and impurities enhancing the appearance. This wrapper has an electric heat blade that cuts the wrapping film from the roll. The heated Teflon plate brings the film tight to the package, assuring a perfect and clean finish. The body of the IP 500WD is made of stainless steel and complies with health department regulations. IP 500WD can fit a roll of wrapping film up to 500mm wide.
| PI 500WD |
I – Bar
Sizes: 330mm / 450mm / 600mm / 800mm
Professionally shrink wrap packages for just pennies. Simple three step operation and no warm up required. Enhance the appearance and value of your product by protecting it against pilfering, dirt, dust, moisture and handling. Sturdy industrial quality. An excellent unit for P.P., P.V.C., P.E. Materials. Systems include: Bar Sealer, Timer, Two Speed Heat Gun and Holder, Film Rack, 150M. roll of centerfold 75 gauge shrink film, outlet plug and parts kit.
| PI 300IP / 450IP / 600IP / 800IP
|
L – Bar
Economical Portable 340 x 340mm L-BAR Sealer
One step less than the I-Bar, this shrink wrap system is an excellent unit for P.P., P.V.C., P.E. Materials. This machine makes two seals at one time to save time, energy and increases production. It has a 340 x 340mm seal and cutting bars for up to 0.5mm thick film. 550w power, seal time 1 – 4 seconds. Film dispenser rack included.
NB Film and Heat Gun sold separately.
| PI 300LP |
Sealers with Imprinter
Each unit can be adapted to an Impulse or Constant Heat Sealer for easy sealing and printing. Quick and easy imprinting on poly bags, plastic cases and paper product packages. For manufacturers of all types of products that need code, date, and number to identify with a permanent mark. Printing tape and type included.
Impulse Sealer and 660HS
PI-660HS (2lines 14 letters) 8*28 mm/Tape 30mm*120m
PI-300FI with 660HS 660HS Inside device for impulse sealer
2 lines | Constant Heat Sealer and 661HS
PI-661HS (2 lines 14 letters) 8*28 mm/Tape 30mm*120m
PI-300CFN with 661HS 661HS for Constant Heat Sealer – 2 lines | Automatic Sealer and 662HS
PI-662HS (2 lines 14 letters) 8*28 mm/Tape 30mm*120m
PI-450AI with 662HS
662HS outside device for impulse sealer – 2 lines
|
Single Impulse Sealers
The MEC line of heavy duty Impulse Foot Sealers (FI Series) helps to increase sealing production. This sealer, equipped with a foot pedal activator, frees the user’s hands to feed the machine. Each unit comes complete with a pedestal, stand, adjustable worktable and foot pedal. Both 2mm and 5mm sealing width available. A Hot Stamp Printer can be added as an optional part to print date, time and other information on your product. Other options available are our Heavy Duty Work Tables, Stand Extensions and Tilt Head adjustments. They can be added to each foot sealer for your specific needs. | PI 300FI / 305FI / 450FI / 4510FI / 455FI / 600FI / 605FI / 800FI / 805FI |
Double Impulse Sealers
For materials that require HIGHER temperatures…
The MEC Double Impulse Foot Sealers utilizes top and bottom sealing jaws for heavy duty applications requiring thick plastics. Great for sealing thick materials and gusset bags that are over 0.2mm and up to 0.4mm. These Double Impulse Foot Sealers produce a wide seal and fuses the material from both sides. Every Double Impulse Foot Sealer comes complete with adjustable worktable and stand.
| PI 305FD / 455FD / 605FD / 3010FD / 4510FD / 6010FD |
Constant Heat Sealers with Beeper
Beeper and Signal light ensures quality seals consistently
These foot sealers are excellent for sealing polycello films, humidity-proof cellophane film, polyethylene film, aluminum foil coated bags and gusset bags. A distinctive mesh, 15mm wide by 200, 300, 400 or 600mm long seal is standard on these units. These sealers are ideal for producing wide seals of heavier materials. Each unit is equipped with a temperature controller and Beeper Signal to notify the operator to release the pedal when sealing is complete. Electro static paint and Teflon coated sealing bars. Complete with pedestal, stand, and adjustable work table.
The specifications for the “line”style sealers is the same as standard mesh type.
| PI 200CFN / 300CFN / 400CFN / 600CFN / PI 200CF / 300CF / 400CF |
Vertical Double Impulse Sealers
Designed for applications that require Double sided heavy-duty vertical sealing such as packaging of powders and liquids as well as heavy bags that are difficult to lift. This unit is electric foot pedal controlled and operates automatically. It can be combined with a conveyor for filling. Comes with an extra long stand for added flexibility. Can be used with either a double impulse auto sealer (FDV).
| PI 305FDV / 455FDV / 605FDV / 3010FDV / 4510FDV / 4510FDV / 6010FDV |
Vertical Constant Heat Sealers
Excellent for aluminum foil bags and gusset bags. Ideal for powder and liquid packaging.
| PI 200CFV / 300CFV / 400CFV / 600CFV |
Upper Jaw Impulse Foot Sealers
No more mess, easy to clean and maintain. Great for packaging meat and fish products etc…
The Upper Jaw Impulse Foot Sealer (FIU models) has the sealing element on the upper seal jaw and the silicon rubber on the lower steel jaw. This Upper Jaw Impulse Foot Sealer design keeps the sealing equipment above the product enabling the user to seal liquids or products with high moisture content. This model makes a clean and secure 2mm, 5mm or 10mm seal on plastic materials. | PI 300FIU / 450FIU / 600FIU / 305FIU / 455FIU / 605FIU / 3010FIU / 4510FIU / 6010FIU |
Adjustable Angle Impulse Foot Sealers
The Adjustable Angle Impulse Foot Sealer (FIT Models) comes standard with the adjustable head angle. This option allows the user to bring the sealing jaws closer to the product by tilting down. It minimizes the need to constantly lift the product to the sealing jaws, increasing production time and reducing user fatigue. Included are extended foot pedal and large heavy-duty work-table. The heavy-duty work-table is adjustable up to a 45 degree downward tilt. This option is perfect and ideal for sealing packages that may contain loose items like powders, grains or liquids.
| PI 300FIT / 450FIT / 600FIT / 305FIT / 455FIT / 600FIT / 3010FIT / 4510FIT / 6010FIT |
Upper Jaw Constant Heat Sealer
The Upper Jaw Constant Heat Sealer has a 3mm sealing bar on the upper jaw only. This sealer is very concentrated. Recommended for difficult applications that are not suited for standard style sealers.
| PI 300CFS / 400CFS |
Seal and Cut Impulse Foot Sealer
The Seal and Cut Impulse Foot Sealer (FDC models) is the first model designed to cut and seal in one operation. With the help of both a round wire and a flat 2mm wire, these sealers give the operator a secured seal while eliminating the excess material above the seal. This seal and cut Impulse Sealer can extend its abilities with an additional accessory that allows the sealing head to be adjusted in different sealing angles. | PI 300FDC / 450FDC / 600FDC |
Impulse Foot Sealers with Cutter
Convenient, economical, Easy to clean and maintain.
This impulse foot sealer with cutter has an obstruction free throat allowing the use of roll-dispensed material to pack and seal. Can be adjusted to a 45 degree angle making it perfect for sealing liquids, powders etc. Equipped with a sliding blade for cutting excess material a quarter of an inch from seal. Also good for sealing roll bags.
| PI 450FC / 600FC / 455FC / 605FC |
Pneumatic Press – Impulse Sealers
The new pneumatic impulse foot sealer is unique, because the actual sealing pressure is now strong, consistent and controllable. Helpful in sealing applications where time and pressure need to be regulated. These unique sealers are quieter in that the clanging noise found in most other automatic sealers is reduced. | PI 300FA / 450FA / 600FA / 305FA / 455FA / 605FA / 805FA
Bi-Active Sealers
PI 305FAB / 455FAB / 605FAB / 805FAB / 3010FAB / 4510FAB / 6010FAB |
INDUSTRIAL IMPULSE SEALERS
S-Type
The sealer is used for closing and also producing bags through a fast and simple sealing. The machines are produced in 5 different widths. The sealing and cooling time can be adjusted separately, so the machine is ideal for foils of different kind and quality, like PE, PP, PA, PVC, double-coated foils and thinner paper-foils and aluminium-foils, combined materials.
| Standard Implementation
Sealing wire 5mm
Safety cutting knife
Stand and foot pedal
Working table and bag holder
Film roll holding unit
Film stop
Connecting cable
|
|
|
|
Product enquiries? We'll call you back within 2 hours!
To enquire about the supply of any product on this website - or just for some free packaging supplies advice from the experts - complete and send the form below and we'll call you back within two hours.
(NZ business hours: 9am - 5pm)
Or just phone us on +64-4-566 0802.
|
